D-Link DES-1210-52/ME - Show Dscp_Mapping

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
202
To configure the DSCP mapping with value 10 and class 2:
DES-1210-52/ME:5# config dscp_mapping dscp_value 10 class 2
Command: config dscp_mapping dscp_value 10 class 2
Success.
DES-1210-52/ME:5#
show dscp_mapping
Purpose
To display the setting of DSCP mapping.
Syntax
show dscp_mapping {dscp_value <value 0-63>}
Description
The show dscp_mapping command displays the mapping of DSCP
value.
Parameters
dscp_value <value 0-63> - The selected value of priority will be
dispalyed. The value may be between 0 and 63.
Restrictions
None.
Example usage:
To display the DSCP mapping with value 10:
DES-1210-52/ME:5# show dscp_mapping dscp_value 10
Command: show dscp_mapping dscp_value 10
DSCP Class
--------------------------
10 2
DES-1210-52/ME:5#