D-Link DES-1210-52/ME - Traceroute; Traceroute6

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
27
Reply From : 3000::1, bytes=200, time<10ms
Reply From : 3000::1, bytes=200, time<10ms
--- 3000::1 Ping Statistics ---
4 Packets Transmitted, 4 Packets Received, 0% Packets Loss
DES-1210-52/ME:5#
traceroute
Purpose
The traceroute User EXEC mode command discovers routes that
packets actually take when traveling to their destination.
Syntax
traceroute <ip_addr> {[max-ttl <short 1-99> | min-ttl <short 1-
99>}
Description
The traceroute command discovers routes that packets actually
take when traveling to their destination.
Parameters
<ip_addr> - Specifies the IP address of the destination host.
max-ttl <short 1-99> - The largest TTL value that can be used.
The traceroute command terminates when the destination is
reached or when this value is reached.
min-ttl <short 1-99> - The smallest TTL value that can be used.
The traceroute command terminates when the destination is
reached or when this value is reached.
Restrictions
Only Administrator or operate-level users can issue this command.
Example usage:
To trace route IP 10.90.90.92 with max-ttl is 10:
DES-1210-52/ME:5# traceroute 10.90.90.92 max-ttl 10
Command: traceroute 10.90.90.92 max-ttl 10
Tracing Route to 10.90.90.92 with 10 hops max and 1 byte packets
[!N - Network Unreachable !H - Host Unreachable !P - Protocol Unreachable]
1 0.0.0.0 * * *
2 0.0.0.0 * * *
3 0.0.0.0 * * *
4 0.0.0.0 * * *
5 0.0.0.0 * * *
6 0.0.0.0 * * *
7 0.0.0.0 * * *
8 0.0.0.0 * * *
9 0.0.0.0 * * *
10 0.0.0.0 * * *
DES-1210-52/ME:5#
traceroute6
Purpose
The traceroute User EXEC mode command discovers routes that
packets actually take when traveling to their destination.