D-Link DES-1210-52/ME - Show Cos Mac_Mapping; Delete Cos Mac_Mapping

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
185
DES-1210-52/ME:5# config cos mac_mapping destination_addr 00-00-00-
01-02-03 class 2
Command: config cos mac_mapping destination_addr 00-00-00-01-02-03
class 2
Success.
DES-1210-52/ME:5#
show cos mac_mapping
Purpose
To display the CoS MAC mapping method.
Syntax
show cos mac_mapping {destination_addr <macaddr>}
Description
The show cos mac_mapping command is used to display the CoS
MAC mapping method on the Switch.
Parameters
<macaddr> - Specifies the MAC address to be removed.
Restrictions
None.
Example usage:
To display the CoS mac mapping on the Switch:
DES-1210-52/ME:5# show cos mac_mapping
Command: show cos mac_mapping
MAC ADDRESS Class
---------------------------------------------------
00-00-00-01-02-03 2
DES-1210-52/ME:5#
delete cos mac_mapping
Purpose
To remove the CoS MAC mapping method.
Syntax
delete cos mac_mapping destination_addr <macaddr>
Description
The delete cos mac_mapping command is used to delete the CoS
MAC mapping method on the Switch.
Parameters
<macaddr> - Specifies the MAC address to be removed.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To delete the CoS mac mapping on the Switch:
DES-1210-52/ME:5# delete cos mac_mapping destination_addr 00-00-00-
01-02-03
Command: delete cos mac_mapping destination_addr 00-00-00-01-02-03
Success.