D-Link DES-1210-52/ME - Show Arpentry Aging_Time

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
330
To display all ARP entries information on the Switch:
DES-1210-52/ME:5# show arpentry information
Command: show arpentry information
ARP Configurations:
-------------------
Maximum number of ARP request retries is 3
ARP cache timeout is 1800 seconds
DES-1210-52/ME:5#
show arpentry aging_time
Purpose
To displays the ARP entry aging time on the Switch.
Syntax
show arpentry aging_time
Description
The show arpentry aging_time command displays the ARP entry
aging time on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display the ARP entry aging time on the Switch:
DES-1210-52/ME:5# show arpentry aging_time
Command: show arpentry aging_time
ARP Aging Time = 30 (minutes)
DES-1210-52/ME:5#