D-Link DES-1210-52/ME - Show Log; Enable Syslog

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
143
Syntax
clear log
Description
The clear log command clears the Switch’s history log.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To clear the log information:
DES-1210-52/ME:5# clear log
Command: clear log
Success.
DES-1210-52/ME:5#
show log
Purpose
To display the Switch history log.
Syntax
show log {index <indexlist> | module <string 32> | severity [all |
information | warning]}
Description
The show log command displays the contents of the Switch’s
history log.
Parameters
index <indexlist> − The number of entries in the history log to
displayed.
module <string 32> − The module of entries in the history log to be
displayed.
[all | information | warning] -
Restrictions
None.
Example usage:
To display the Switch history log:
DES-1210-52/ME:5# show log
Command: show log
Index Time Log Text
----- -------------------- ------------------------------------------
DES-1210-52/ME:5#
enable syslog
Purpose
To enable the system log to be sent to a remote host.
Syntax
enable syslog
Description
The enable syslog command enables the system log to be sent to a
remote host.
Parameters
None.