D-Link DES-1210-52/ME - Show Dhcpv6_Relay Option_38

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
128
option 38 field before being relayed to the server. When the state is
disabled, the DHCP packet is relayed directly to the server.
subscriber_id [defult | user_define] - Use the user-defined string as
the subscriber ID.
Restrictions
Only Administrator or operate-level users can issue this command.
Example usage:
To configure the DHCPv6 relay option_38 of ports 6~9 to be enabled on the Switch:
DES-1210-52/ME:5# config dhcpv6_relay option_38 ports 6-9 state enable
Command: config dhcpv6_relay option_38 ports 6-9 state enable
Success.
DES-1210-52/ME:5#
show dhcpv6_relay option_38
Purpose
Used to display the DHCPv6 relay option 38 of the switch.
Syntax
show dhcpv6_relay option_38 {ports <portlist>}
Description
The show dhcpv6_relay option_38 command is used to display
the DHCPv6 relay option 38 of the switch.
Parameters
ports <portlist> - Specifies the ports to be displayed.
Restrictions
None.
Example usage:
To display the DHCPv6 relay option 38 of ports 5-8 on the Switch:
DES-1210-52/ME:5# show dhcpv6_relay option_38 ports 5-8
Command: show dhcpv6_relay option_38 ports 5-8
DHCPv6 Relay Option38 Information
Port State Type Subscriber ID
----- --------- -------------- ----------------------
5 Disabled Default
6 Disabled Default
7 Disabled Default
8 Disabled Default
DES-1210-52/ME:5#