D-Link DES-1210-52/ME - Show Stp

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
158
Syntax
disable stp
Description
The disable stp command sets the Spanning Tree Protocol to be
globally disabled on the Switch.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To disable STP on the Switch:
DES-1210-52/ME:5# disable stp
Command: disable stp
Success.
DES-1210-52/ME:5#
show stp
Purpose
To display the Switch’s current STP configuration.
Syntax
show stp
Description
The show stp command displays the Switch’s current STP
configuration.
Parameters
None.
Restrictions
None.
Example usage:
To display the status of STP on the Switch:
DES-1210-52/ME:5# show stp
Command: show stp
STP Bridge Global Settings
-----------------------------------------------
STP Status : Enabled
STP Version : MSTP
Bridge Priority : 32768
Max Age : 6
Hello Time : 2
Forward Delay : 4
TX Hold Count : 2
Forward BPDU : Enabled
Root Cost : 0
Root Maximum Age : 6
Root Forward Delay : 4
Root Port : 0
Root Bridge : 80:00:00:01:02:03:04:05
DES-1210-52/ME:5#