D-Link DES-1210-52/ME - Show Stp Mst_Config_Id; Create Stp Instance_Id

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
160
## MST00
Designated Root Bridge 00:01:02:03:04:05 Priority 32768
We are the Root for CST
Port 0 , path cost 0
Regional Root Bridge 00:01:02:03:04:05 Priority 32768
Path cost 0
Designated Bridge 00:01:02:03:04:05 Priority 32768
Configured Forward delay 4, Max age 6, Max hops 20
Operational Forward delay 4, Max age 6
Interface Role Sts Cost Prio.Nbr Type
------------- -------- --- ------- ------------- ----
DES-1210-52/ME:5#
show stp mst_config_id
Purpose
To display the MSTP configuration identification.
Syntax
show stp mst_config_id
Description
The show stp mst_config_id command displays the Switch’s
current MSTP configuration identification.
Parameters
None.
Restrictions
None.
Example usage:
To show the MSTP configuration identification currently set on the Switch:
DES-1210-52/ME:5# show stp mst_config_id
Command: show stp mst_config_id
Name [00-01-02-03-04-05]
Revision 0
Instance Vlans mapped
-------- -----------------------------------------------------
0 1-1024,1025-2048,2049-3072,3073-4094
----------------------------------------------------------------------
DES-1210-52/ME:5#
create stp instance_id
Purpose
To create instance ID on the Switch.
Syntax
create stp instance_id <value 1-63>
Description
The create stp instance_id command creates an instance ID of
STP on the Switch.