D-Link DES-1210-52/ME - Config 802.1 P Default_Priority; Show 802.1 P Default_Priority

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
199
Priority-6 -> <Class-6>
Priority-7 -> <Class-7>
DES-1210-52/ME:5#
config 802.1p default_priority
Purpose
To assign an 802.1p priority tag to an incoming untagged packet that
has no 802.1p priority tag.
Syntax
config 802.1p default_priority [<portlist> | all] <priority 0-7>
Description
The config 802.1p default_priority command specifies the 802.1p
priority value an untagged, incoming packet is assigned before being
forwarded to its destination.
Parameters
<portlist> − A port or range of ports to be configured.
all − Specifies that the config 802.1p default_priority command
applies to all ports on the Switch.
<priority 0-7> − The 802.1p priority value that an untagged, incoming
packet is granted before being forwarded to its destination.
Restrictions
Only administrator or operator level users can issue this command.
Example usage:
To configure 802.1p default priority on the Switch:
DES-1210-52/ME:5# config 802.1p default_priority all 4
Command: config 802.1p default_priority all 4
Success.
DES-1210-52/ME:5#
show 802.1p default_priority
Purpose
To display the currently configured 802.1p priority value that is
assigned to an incoming, untagged packet before being forwarded to
its destination.
Syntax
show 802.1p default_priority {<portlist>}
Description
The show 802.1p default_priority command displays the currently
configured 802.1p priority value that is assigned to an incoming,
untagged packet before being forwarded to its destination.
Parameters
<portlist> − A port or range of ports to be displayed.
Restrictions
None.
Example usage:
To display the current port 1-4 802.1p default priority configuration on the Switch:
DES-1210-52/ME:5# show 802.1p default_priority 1-4
Command: show 802.1p default_priority 1-4
Port Default Priority Effective Priority
---- ----------------------- ---------------------------
1 4 4