D-Link DES-1210-52/ME - Reset Cpu Port; Enable Telnet

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
29
GVRP 0
ICMP 0
ICMPv6 0
IGMP 0
LACP 0
LLDP 0
PPPoE 0
Reserved Multicast 0
STP 0
TELNET 0
UDP 0
DES-1210-52/ME:5#
reset cpu port
Purpose
To reset the CPU port information.
Syntax
reset cpu port
Description
The reset cpu port command resets the CPU port information.
Parameters
None.
Restrictions
Only Administrator users can issue this command.
Example usage:
To reset the CPU port information:
DES-1210-52/ME:5# reset cpu port
Command: reset cpu port
Success.
DES-1210-52/ME:5#
enable telnet
Purpose
To enable the telnet.
Syntax
enable telnet
Description
The enable telnet command enables telnet.
Parameters
None.
Restrictions
Only Administrator or operate-level users can issue this command.
Example usage:
To enable telnet:
DES-1210-52/ME:5# enable telnet
Command: enable telnet
Success.