D-Link DES-1210-52/ME - Delete Access_Profile; Show Access_Profile

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
401
2 ports 2 deny
Success.
DES-1210-52/ME:5#
delete access_profile
Purpose
To delete a previously created access profile
Syntax
delete access_profile profile_id <value 1-10>
Description
The delete access_profile command deletes a previously created
access profile on the Switch.
Parameters
profile_id <value 1-10> – Specifies the access profile to be deleted.
Restrictions
Only administrator or operate-level users can issue this command.
Example usage:
To delete the access profile with a profile ID of 1:
DES-1210-52/ME:5# delete access_profile profile_id 1
Command: delete access_profile profile_id 1
Success.
DES-1210-52/ME:5#
show access_profile
Purpose
To display the currently configured access profiles on the Switch.
Syntax
show access_profile {profile_id <value 1-10>}
Description
The show access_profile command displays the currently
configured access profiles.
Parameters
profile_id <value 1-10> – Specifies the access profile to be
displayed. This value is assigned to the access profile when it is
created with the create access_profile command. If the profile_id
parameter is omitted, all access profile entries are displayed.
Restrictions
None.
Example usage:
To display the currently configured access profiles which profile id is 1 on the Switch: