DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
320
DES-1210-52/ME:5# config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-
interval 60
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 60
Success.
DES-1210-52/ME:5#
To display the SNTP information.
The show sntp command displays SNTP settings information,
including the source IP address, time source and poll interval.
Example usage:
To display SNTP configuration information:
DES-1210-52/ME:5# show sntp
Command: show sntp
SNTP Information
------------------------------------------
Current Time Source : Local
SNTP : Disabled
SNTP Primary Server : 10.1.1.1
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval : 60 sec
DES-1210-52/ME:5#
To enable SNTP server support.
The enable sntp command enables SNTP server support. SNTP
service must be separately configured (see config sntp). Enabling
and configuring SNTP support override any manually configured
system time settings.
Only administrator and Operator-level users can issue this
command. SNTP settings must be configured for SNTP to function
(config sntp).
Example usage:
To enable the SNTP function:
To Next Page
Loading...
Need help?
General
