D-Link DES-1210-52/ME - Disable Snmp Duplicate_Ip_Detected Traps

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
107
disable snmp duplicate_IP_detected traps
Purpose
To disable SNMP duplicate IP detected traps support on the Switch.
Syntax
disable snmp duplicate_IP_detected traps
Description
The disable snmp duplicate_IP_detected traps command
disables SNMP duplicate IP detected traps support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable the SNMP duplicate_IP_detected traps on the Switch:
DES-1210-52/ME:5# disable snmp duplicate_IP_detected traps
Command: disable snmp duplicate_IP_detected traps
Success.
DES-1210-52/ME:5#