D-Link DES-1210-52/ME - Enable 802.1 X; Disable 802.1 X

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
301
Command
Parameter
guest_vlan
create 802.1x user
<username 15>
show 802.1x user
delete 802.1x user
<username 15>
config 802.1x capability
ports
[<portlist> | all] [authenticator | none]
Each command is listed in detail, as follows:
enable 802.1x
Purpose
To enable the 802.1x server on the Switch.
Syntax
enable 802.1x
Description
The enable 802.1x command enables the 802.1x Port-based
Network Access control server application on the Switch.
Parameters
None.
Restrictions
Only Administrator, operator or power user-level users can issue this
command.
Example usage:
To enable 802.1x switch wide:
DES-1210-52/ME:5# enable 802.1x
Command: enable 802.1x
Success.
DES-1210-52/ME:5#
disable 802.1x
Purpose
To disable the 802.1x server on the Switch.
Syntax
disable 802.1x
Description
The disable 802.1x command disables the 802.1x Port-based
Network Access control server application on the Switch.
Parameters
None.
Restrictions
Only Administrator, operator or power user-level users can issue this
command.
Example usage:
To disable 802.1x on the Switch:
DES-1210-52/ME:5# disable 802.1x
Command: disable 802.1x