D-Link DES-1210-52/ME - Show Mac_Notification; Show Mac_Notification Ports

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
255
To enable port 7 for MAC address table notification:
DES-1210-52/ME:5# config mac_notification ports 7 enable
Command: config mac_notification ports 7 enable
Success.
DES-1210-52/ME:5#
show mac_notification
Purpose
Used to display the Switch’s MAC address table notification global
settings.
Syntax
show mac_notification
Description
The show mac_notification command is used to display the
Switch’s MAC address table notification global settings.
Parameters
None.
Restrictions
None.
Example usage:
To view the Switch’s MAC address table notification global settings:
DES-1210-52/ME:5# show mac_notification
Command: show mac_notification
Global Mac Notification Settings
State : Enabled
Interval : 1
History Size : 1
DES-1210-52/ME:5#
show mac_notification ports
Purpose
Used to display the Switch’s MAC address table notification status
settings.
Syntax
show mac_notification ports {<portlist>}
Description
The show mac_notification ports command is used to display the
Switch’s MAC address table notification status settings.
Parameters
<portlist> − Specify a port or group of ports to be viewed.
Entering this command without the parameter will display the MAC
notification table for all ports.
Restrictions
None.
Example usage:
To display all port’s MAC address table notification status settings:
DES-1210-52/ME:5# show mac_notification ports 1-5
Command: show mac_notification ports 1-5