D-Link DES-1210-52/ME - Delete Authen_Enable Method_List_Name

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
365
 server_group <string 15> – Specifies the server group name
for authentication.
 none – Specifies that no authentication is required to access
the Switch.
method_list_name <string 15> – Specifies a previously created
authen_enable method_list_name. The user may add one or more
of the following authentication methods to this method list:
 tacacs+ – Specifies that the user is to be authenticated
using the TACACS+ protocol from a remote TACACS+
server.
 radius - Specifies that the user is to be authenticated using
the RADIUS protocol from a remote RADIUS server.
 local - Specifies that the user is to be authenticated using
the local user account database on the Switch. The local
enable password of the device can be configured using the
‘config admin local_password’ command.
 server_group <string 15> –Specifies that the user is to be
authenticated using the server group account database on
the Switch.
 none – Specifies that no authentication is required to access
the Switch.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the user defined method list ‘Permit’ with authentication methods TACACS+, RADIUS and
local_enable, in that order.
DES-1210-52/ME:5# config authen_enable method_list_name Trinity method
tacacs+ radius local
Command: config authen_enable method_list_name Trinity method tacacs+ radius
local
Success.
DES-1210-52/ME:5#
delete authen_enable method_list_name
Purpose
To delete a user-defined list of authentication methods for promoting
normal user level privileges to Administrator level privileges on the
Switch.
Syntax
delete authen_enable method_list_name <string 15>
Description
The delete authen_enable method_list_name command deletes a
user-defined list of authentication methods for promoting user level
privileges to Adminstrator level privileges.
Parameters
<string 15> - The previously created authen_enable
method_list_name to be deleted.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To delete the user-defined method list ‘Permit’