D-Link DES-1210-52/ME - Config Scheduling

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
181
Command
Parameter
protocol_mapping
config cos
vlanid_mapping
vid <vlanid 1-4094> class <class_id 0-3>
show cos
vlanid_mapping
{vid <vlanid 1-4094>}
delete cos
vlanid_mapping
vid <vlanid 1-4094>
config cos tos value
<value 0-7> class <priority 0-7>
show cos tos
{value <value 0-7>}
config cos
tcp_port_mapping
destination_port <value 0-65535> class <class_id 0-3>
show cos
tcp_port_mapping
{destination_port <value 0-65535>}
delete cos
tcp_port_mapping
destination_port <value 0-65535>
config cos
udp_port_mapping
destination_port <value 0-65535> class <class_id 0-3
show cos
udp_port_mapping
{destination_port <value 0-65535>}
delete cos
udp_port_mapping
destination_port <value 0-65535>
config 802.1p
user_priority
<priority 0-7> <class_id 0-7>
show 802.1p
user_priority
config 802.1p
default_priority
[<portlist> | all] <priority 0-7>
show 802.1p
default_priority
{<portlist>}
config
scheduling_mechanism
[strict | wrr]
show
scheduling_mechanism
config dscp mode
config dscp_mapping
dscp_value <value 0-63> class <class_id 0-3>
show dscp_mapping
{dscp_value <value 0-63>}
Each command is listed in detail, as follows:
config scheduling
Purpose
To configure traffic scheduling for each of the Switch’s QoS queues.