D-Link DES-1210-52/ME - Enable Gratuitous_Arp Log; Disable Gratuitous_Arp Log

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
134
Example usage:
To enable learning of ARP entries based on the received gratuitous ARP packets:
DES-1210-52/ME:5# config gratuitous_arp learning enable
Command: config gratuitous_arp learning enable
Success!
DES-1210-52/ME:5#
enable gratuitous_arp log
Purpose
Used to enable the gratuitous ARP log.
Syntax
enable gratuitous_arp log
Description
The enable gratuitous_arp log command is used to enable
gratuitous ARP log states. The Switch can log the IP conflict event to
inform the administrator.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable the System’s interface gratuitous ARP log:
DES-1210-52/ME:5# enable gratuitous_arp log
Command: enable gratuitous_arp log
Success!
DES-1210-52/ME:5#
disable gratuitous_arp log
Purpose
Used to disable the gratuitous ARP log.
Syntax
disable gratuitous_arp log
Description
The disable gratuitous_arp log command is used to disable
gratuitous ARP log states. The Switch can log the IP conflict event to
inform the administrator.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable the System’s interface gratuitous ARP log:
DES-1210-52/ME:5# disable gratuitous_arp log
Command: disable gratuitous_arp log
Success!