D-Link DES-1210-52/ME - Show Snmp Global State; Show Snmp Groups

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
86
Success.
DES-1210-52/ME:5#
show snmp global state
Purpose
To display the global state of SNMP currently configured on the
Switch.
Syntax
show snmp global state
Description
The show snmp global state command displays the global state of
SNMP groups currently configured on the Switch.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To display the currently configured SNMP global state on the Switch:
DES-1210-52/ME:5# show snmp global state
Command: show snmp global state
SNMP Global State : Enable
DES-1210-52/ME:5#
show snmp groups
Purpose
To display the group-names of SNMP groups currently configured
on the Switch. The security model, level, and status of each group
are also displayed.
Syntax
show snmp groups
Description
The show snmp groups command displays the group-names of
SNMP groups currently configured on the Switch. The security
model, level, and status of each group are also displayed.
Parameters
None.
Restrictions
None.
Example usage:
To display the currently configured SNMP groups on the Switch: