D-Link DES-1210-52/ME - Show Igmp_Snooping

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
269
VLAN or forward mcrouter for IGMP Snooping on the Switch.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
TTo disable IGMP snooping on the Switch:
DES-1210-52/ME:5# disable igmp_snooping
Command: disable igmp_snooping
Success.
DES-1210-52/ME:5#
show igmp_snooping
Purpose
To show the current status of IGMP snooping on the Switch.
Syntax
show igmp_snooping {vlan <vlan_name 32> | vlanid <vidlist> |
multicast_vlan <vlan_name 32> | multicast_vlan_group
<vlan_name 32>}
Description
The show igmp_snooping command displays the current IGMP
snooping configuration on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN for which IGMP snooping
configuration is to be displayed. Up to 32 characters can be used.
<vidlist> − The vid of the VLAN for which IGMP snooping
configuration is to be displayed.
Restrictions
None.
Example usage:
To show igmp snooping:
DES-1210-52/ME:5# show igmp_snooping vlan default
Command: show igmp_snooping vlan default
IGMP Snooping Global State : Enable
Max Learned Entry Value : 512
Forward Router Only : Disable
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Querier State : Disable
Querier Role : Non-Querier
Querier IP : 0.0.0.0
Querier Expiry Time : 0
State : Enable
Fast Leave : Disable
Report Suppression : Enable