D-Link DES-1210-52/ME - Config Igmp_Snooping Querier

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
259
state [enable | disable] − Enables or disables IGMP snooping for the
specified VLAN.
Restrictions
Only administrator, operator or power user-level users can issue this
command.
Example usage:
To configure the igmp snooping:
DES-1210-52/ME:5# config igmp_snooping default host_timeout 250 state
enable
Command: config igmp_snooping default host_timeout 250 state enable
Success. !
DES-1210-52/ME:5#
config igmp_snooping querier
Purpose
To configure IGMP snooping querier on the Switch.
Syntax
config igmp_snooping querier [vlan_name <string 32> | vlanid
<vidlist> | all] state [enable | disable] {querier_version [2 | 3] |
last_member_query_interval <sec 1-25> | query_interval <sec
60-600> | robustness_variable <value 2-255> |
max_response_time <sec 10-25>}
Description
The config igmp_snooping querier command enables IGMP
snooping querier on a specific VLAN.
Parameters
vlan_name <string 32> − The name of the VLAN for which IGMP
snooping is to be configured. Up to 20 characters can be used.
vlanid <vidlist> − The VLAN id for which IGMP snooping is to be
configured.
all − Specifies all VLAN for which IGMP snooping is to be
configured.
state [enable | disable] − Enables/Disables IGMP Snooping Querier.
querier_version [2 | 3] − Specifies the IGMP Querier version on the
VLAN.
last_member_query_interval [sec 1-25] − Specifies the IGMP last
member query interval on the VLAN.
query_interval [sec 60-600] − Specifies the IGMP query interval on
the VLAN.
robustness_variable [value 2-255] − Specifies the robustness on the
VLAN.
max_response_time [sec 10-25] − Specifies the max response time
on the VLAN.
Restrictions
Only administrator, operator or power user-level users can issue this
command.
Example usage:
To configure the igmp snooping:
DES-1210-52/ME:5# config igmp_snooping querier vlanid 2 state enable
Command: config igmp_snooping querier vlanid 2 state enable