D-Link DES-1210-52/ME - Config Cos Udp_Port_Mapping; Show Cos Udp _Port_Mapping

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
196
Description
The delete cos tcp_port_mapping command is used to delete the
CoS TCP port mapping information on the Switch.
Parameters
<value 0-65535> - Specifies the mapped tcp port information to be
deleted.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To delete the CoS TCP port mapping on the Switch:
DES-1210-52/ME:5# delete cos tcp_port_mapping destination_port 500
Command: delete cos tcp_port_mapping destination_port 500
Success.
DES-1210-52/ME:5#
config cos udp_port_mapping
Purpose
To configure the CoS UDP port mapping on the Switch.
Syntax
config cos udp_port_mapping destination_port <value 0-65535>
class <class_id 0-3>
Description
The config cos udp _port_mapping command is used to configure
the CoS UDP port mapping on the Switch.
Parameters
<value 0-65535> - Specifies the udp port number to be mapped.
<class_id 0-3> - Specifies the number of the Switch’s hardware
priority queue.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To configure the CoS UDP port mapping on the Switch:
DES-1210-52/ME:5# config cos udp_port_mapping destination_port 500
class 2
Command: config cos udp_port_mapping destination_port 500 class 2
Success.
DES-1210-52/ME:5#
show cos udp _port_mapping
Purpose
To displays the CoS UDP port mapping information on the Switch.
Syntax
show cos udp_port_mapping {destination_port <value 0-
65535>}
Description
The show cos udp _port_mapping command is used to display
the CoS UDP port mapping information on the Switch.
Parameters
<value 0-65535> - Specifies the mapped udp port information to be
displayed.