D-Link DES-1210-52/ME - Show Password_Recovery

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
179
DES-1210-52/ME:5# disable password_recovery
Command: disable password_recovery
Success.
DES-1210-52/ME:5#
show password_recovery
Purpose
To show the password recovery mode on the Switch.
Syntax
show password_recovery
Description
The show password_recovery command is used to display the
password recovery mode on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display the password recovery mode:
DES-1210-52/ME:5# show password_recovery
Command: show password_recovery
Password Recovery Mode : Enabled
DES-1210-52/ME:5#