D-Link DES-1210-52/ME - Show Address_Binding Dhcp_Pd_Snoop; Enable Address_Binding Roaming

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
72
Command: disable address_binding dhcp_pd_snoop
Success.
DES-1210-52/ME:5#
show address_binding dhcp_pd_snoop
Purpose
Used to display address binding DHCPv6 PD Snooping.
Syntax
show address_binding dhcp_pd_snoop {binding_entry | ports
<portlist>}
Description
This show address_binding dhcp_pd_snoop command is used to
display IP-MAC-port binding DHCPv6 PD snooping.
Parameters
None.
Restrictions
None.
Example usage:
To display address binding DHCPv6 PD Snooping on the Switch:
DES-1210-52/ME:5# show address_binding dhcp_pd_snoop binding_entry
Command: show address_binding dhcp_pd_snoop binding_entry
IP Address Port Lease Remain
--------------------------------------- ------- ---------- ------------
Total Entries : 0
DES-1210-52/ME:5#
enable address_binding roaming
Purpose
Used to enable address binding roaming.
Syntax
enable address_binding roaming
Description
This enable address_binding roaming command is used to enable
IP-MAC-port binding roaming.
Parameters
None.
Restrictions
Only administrator or operate-level users can issue this command.
Example usage:
To enable the roaming of address binding on the Switch:
DGS-1210-28/ME:5# enable address_binding roaming
Command: enable address_binding roaming
Success.
DES-1210-52/ME:5#