D-Link DES-1210-52/ME User Manual

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
197
Restrictions
None.
Example usage:
To display the CoS UDP port mapping on the Switch:
DES-1210-52/ME:5# show cos udp_port_mapping
Command: show cos udp_port_mapping
UDP Port Class
-------------------------------------------
500 2
DES-1210-52/ME:5#
delete cos udp_port_mapping
Purpose
To delete the CoS UDP port mapping information on the Switch.
Syntax
delete cos udp_port_mapping destination_port <value 0-65535>
Description
The delete udp tcp_port_mapping command is used to delete the
CoS TCP port mapping information on the Switch.
Parameters
<value 0-65535> - Specifies the mapped udp port information to be
deleted.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To delete the CoS UDP port mapping on the Switch:
DES-1210-52/ME:5# delete cos udp_port_mapping destination_port 500
Command: delete cos udp_port_mapping destination_port 500
Success.
DES-1210-52/ME:5#
config 802.1p user_priority
Purpose
To map the 802.1p user priority of an incoming packet to one of the
four hardware classes of service available on the Switch.
Syntax
config 802.1p user_priority <priority 0-7> <class_id 0-7>
Description
The config 802.1p user_priority command configures the way the
Switch maps an incoming packet, based on its 802.1p user priority
tag, to one of the four hardware priority classes of service available
on the Switch. The Switch’s default is to map the incoming 802.1p
priority values to the four hardware classes of service according to
the following chart:
802.1p value Switch Priority Queue Switch Priority Queue(stack)
------------------ ----------------------------- -------------------------------------
0 1 0

D-Link DES-1210-52/ME Specifications

General

Brand	D-Link
Model	DES-1210-52/ME
Category	Network Router
Language	English