D-Link DES-1210-52/ME - Enable Password Encryption; Disable Password Encryption

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
9
Command
Parameter
weekdays <daylist 32> date from_day year <start_year 2011-2029> month
<start_mth 1-12> date <start_date 1-31> to_day year <end_year 2011-2029>
month <end_mth 1-12> date <end_date 1-31>] | delete]
show time_range
show tech support
Clear tech support
Each command is listed in detail, as follows:
enable password encryption
Purpose
Used to enable password encryption on a user account.
Syntax
enable password encryption
Description
The user account configuration information will be stored in the
configuration file, and can be applied to the system at a time in the
future. If the password encryption is enabled, the password will be in
encrypted form. If password encryption is disabled and the user
specifies the password in encrypted form, or if the password has
been converted to encrypted form by the last enabled password
encryption command, the password will still be in encrypted form. It
can not revert back to plain text.
Parameters
None.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To enable password encryption on the Switch:
DES-1210-52/ME:5# enable password encryption
Command: enable password encryption
Success.
DES-1210-52/ME:5#
disable password encryption
Purpose
Used to disable password encryption on a user account.
Syntax
disable password encryption
Description
The user account configuration information will be stored in the
configuration file, and can be applied to the system at a time in the
future. If the password encryption is enabled, the password will be in
encrypted form. If password encryption is disabled and the user
specifies the password in encrypted form, or if the password has
been converted to encrypted form by the last enabled password
encryption command, the password will still be in encrypted form. It
can not revert back to plain text.
Parameters
None.