DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
287
all – Displays that MLD snooping which configured for all VLANs on
the Switch.
Example usage:
To show the MLD snooping:
DES-1210-52/ME:5# show mld_snooping vlan_name default
Command: show mld_snooping vlan_name default
MLD Snooping Global State : Enable
Max Learned Entry Value : 512
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Querier State : Disable
Querier Role : Non-Querier
Querier Select : Enable
Querier IP :
Querier Expiry Time : 0
State : Disable
Fast Leave : Disable
Version : 2
Data Driven Learning Aged Out : Disable
Total Entries : 1
DES-1210-52/ME:5#
show mld_snooping forwarding
To display mld snooping settings on the Switch.
show mld_snooping forwarding [vlan_name <string 32> | vlanid
<vidlist> | all]
The show mld_snooping forwarding command displays the
current MLD snooping forwarding table entries currently configured
on the Switch.
vlan_name <string 32> – Displays that the mld snooping applies
only to this previously created VLAN.
vlanid <vidlist> – Displays that the mld snooping applies only to this
previously created VLAN id.
all – Displays that all MLD snooping which configured for all VLANs
on the Switch.
To Next Page
Loading...
