D-Link DES-1210-52/ME - Show Auto_Fdb

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
174
Success.
DES-1210-52/ME:5#
show auto_fdb
Purpose
To display a static entry in the auto forwarding table (database).
Syntax
show auto_fdb {<ipaddr>}
Description
The show auto_fdb command displays a static entry in the
multicast MAC address forwarding table (database).
Parameters
<ipaddr> − The IP address to be display from the auto forwarding
table.
Restrictions
None.
Example usage:
To display auto forwarding table:
DES-1210-52/ME:5# show auto_fdb
Command: show auto_fdb
IP Address VLAN ID MAC Address Port Time Stamp
---------------- -------------- ---------------------- ------ -------------------
172.21.47.13
Success.
DES-1210-52/ME:5#