D-Link DES-1210-52/ME User Manual

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
79
Success.
DES-1210-52/ME:5#
delete snmp user
Purpose
To remove an SNMP user from an SNMP group and also to delete
the associated SNMP group.
Syntax
delete snmp user <username 32> [v1 | v2c | v3]
Description
The delete snmp user command removes an SNMP user from its
SNMP group and then deletes the associated SNMP group.
Parameters
<username 32> − A string of up to 32 alphanumeric characters that
identifies the SNMP user to be deleted.
Restrictions
Only administrator, operate or power user-level users can issue this
command.
Example usage:
To delete an SNMP user on the Switch:
DES-1210-52/ME:5# delete snmp user dlink v3
Command: delete snmp user dlink v3
Success.
DES-1210-52/ME:5#
show snmp user
Purpose
To display information about each SNMP username in the SNMP
group username table.
Syntax
show snmp user
Description
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
Parameters
None.
Restrictions
None.
Example usage:
To display the SNMP users currently configured on the Switch:
DES-1210-52/ME:5# show snmp user
Command: show snmp user
Username Group Name SNMP Version Auth-Protocol PrivProtocol
-------------- ---------------- ---------------- -------------------- ---------------
ReadOnly ReadOnly V1 None None
ReadOnly ReadOnly V2 None None
ReadWrite ReadWrite V1 None None
ReadWrite ReadWrite V2 None None

D-Link DES-1210-52/ME Specifications

General

Brand	D-Link
Model	DES-1210-52/ME
Category	Network Router
Language	English