D-Link DES-1210-52/ME - Show Router_Ports

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
273
show router_ports
Purpose
To display the currently configured router ports on the Switch.
Syntax
show router_ports {vlan <vlan_name 32> | vlanid <vidlist> |
static | dynamic | forbidden}
Description
The show router_ports command displays the router ports
currently configured on the Switch.
Parameters
vlan <vlan_name 32> − The name of the VLAN on which the router
port resides. Up to 20 characters can be used.
vlanid <vidlist> − The ID of the VLAN on which the router port
resides.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically learned.
forbidden − Displays router ports that have been forbidden
configured.
Restrictions
None.
Example usage:
To display the router ports.
DES-1210-52/ME:5# show router_ports
Command: show router_ports
VLAN Name : default
Static router port :
Dynamic router port :
Forbidden router port :
Total Entries : 1
DES-1210-52/ME:5#