D-Link DES-1210-52/ME - Show Config

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
111
DES-1210-52/ME:5# show firmware information
Command: show firmware information
Current : image one
Configured : image one
IMAGE ONE :
Version : 20.01.B054
Size : 8640608 Bytes
Updated Time : 01/01/2014 00:04:48
From : 10.90.90.98
User : Anonymous (web)
IMAGE TWO :
Version : 20.01.B054
Size : 8271800 Bytes
Updated Time : 01/01/2014 00:05:50
From : 10.90.90.99
User : Anonymous (web)
DES-1210-52/ME:5#
show config
Purpose
Used to display the current or saved version of the configuration
settings of the Switch.
Syntax
show config [current_config | config_in_nvram config_id
<value 1-2> {[begin | exclude | include] <string 80>}
Description
The show config command is used to display all the configuration
settings that are saved to NV RAM or display the configuration
settings as they are currently configured. Use the keyboard to list
settings one line at a time (Enter), one page at a time (Space) or
view all (a).
Parameters
None.
Restrictions
Only Administrator -level users can issue this command.
Example usage:
DES-1210-52/ME:5# show config current_config
Command: show config current_config
#-------------------------------------------------------------------------------------------------
# DES-1210-52/ME Fast Ethernet Switch Configuration
#
# Firmware: Build 20.01.B054
# Copyright(C) 2010 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------------------------------------