D-Link DES-1210-52/ME - Show Lldp Mgt_Addr

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
392
DES-1210-52/ME:5# show lldp power_pse_tlv
Command: show lldp power_pse_tlv
Port State
--------------------------------------
1 Enable
2 Enable
3 Enable
4 Enable
5 Enable
6 Enable
7 Enable
8 Enable
9 Enable
10 Enable
11 Enable
12 Enable
13 Enable
14 Enable
15 Enable
16 Enable
17 Enable
18 Enable
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL
show lldp mgt_addr
Purpose
To display the Link Layer Discovery Protocol (LLDP) configuration
that is advertised from a specific port.
Syntax
show lldp mgt_addr {ipv4 <ipaddr> | ipv6 <ipv6addr>}
Description
The show lldp mgt_addr command displays the information
regarding the IPv4 or IPv6 address.
Parameters
ipv4 <ipaddr> | ipv6 <ipv6addr> – Specifies the lldp IPv4 or IPv6
address to be displayed.
Restrictions
None.
Example usage:
To show the LLDP management address advertisement:
DES-1210-52/ME:5# show lldp mgt_addr
Command: show lldp mgt_addr
Address : 1
------------------------------------------------------------------------------
Subtype : IPv6
Address : fe80::2c8:e7ff:fe88:5c95
IF Type : ifIndex
OID : 1.3.6.1.2.1.2.2.1.1
Advertising Ports : (NONE)
Total Address : 1
DES-1210-52/ME:5#