D-Link DES-1210-52/ME - Show Pppoe Circuit_Id_Insertion Ports

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
56
the global state configuration of the PPPoE circuit ID insertion
function.
Parameters
None.
Restrictions
None.
Example usage:
To view the global PPPoE ID insertion state:
DES-1210-52/ME:5# show pppoe circuit_id_insertion
Command: show pppoe circuit_id_insertion
Status: Enabled
DES-1210-52/ME:5#
show pppoe circuit_id_insertion ports
Purpose
Used to display the PPPoE ID insertion configuration on a per
port basis.
Syntax
show pppoe circuit_id_insertion ports {<portlist>}
Description
The show pppoe circuit_id_insertion ports command allows
the user to view the configuration of PPPoE ID insertion for each
port.
Parameters
<portlist> - Specifies which ports to display. If no ports are
specified, all ports configuration will be listed.
Restrictions
None.
Example usage:
To view the PPPoE circuit ID configuration for ports 6 to 8:
DES-1210-52/ME:5# show pppoe circuit_id_insertion ports 6-8
Command: show pppoe circuit_id_insertion ports 6-8
Port State PPPoE Tags
---- -------- ---------------------------------------------
6 Enabled Circuit ID : Switch MAC
Remote ID : Default
7 Enabled Circuit ID : Switch MAC
Remote ID : Default
8 Enabled Circuit ID : Switch MAC
Remote ID : Default
DES-1210-52/ME:5#