D-Link DES-1210-52/ME - Show Igmp_Snooping Host

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
271
current IGMP snooping forwarding table entries currently configured
on the Switch.
Parameters
vlan <vlan_name 32> − The name of the VLAN for which IGMP
snooping forwarding table information is to be displayed. Up to 20
characters can be used.
vlanid <vidlist> − The vid of the VLAN for which IGMP snooping
forwarding table information is to be displayed.
Restrictions
None.
Example usage:
To view the IGMP snooping forwarding table for VLAN ‘Trinity’:
DES-1210-52/ME:5# show igmp_snooping forwarding vlan Trinity
Command: show igmp_snooping forwarding vlan Trinity
Total Entries : 0
DES-1210-52/ME:5#
show igmp_snooping host
Purpose
To display the IGMP snooping host table entries on the Switch.
Syntax
show igmp_snooping host {ports <portlist> | group <ipaddr> |
vlan <vlan_name 32> | vlanid <vidlist>}
Description
The show igmp_snooping host command displays the current
IGMP snooping forwarding table entries currently configured on the
Switch.
Parameters
ports <portlist> − The ports of IGMP snooping host table information
are to be displayed.
group <ipaddr> − The IP address of IGMP snooping host table
information are to be displayed.
vlan <vlan_name 32> − The name of the VLAN for which IGMP
snooping host table information is to be displayed. Up to 20
characters can be used.
vlanid <vidlist> − The vid of the VLAN for which IGMP snooping host
table information is to be displayed.
Restrictions
None.
Example usage:
To view the IGMP snooping host table on the Switch:
DES-1210-52/ME:5# show igmp_snooping host
Command: show igmp_snooping host
VLAN ID Group Port No IGMP Host
----------- ---------------------- ------------- ------------
Total Entries : 0
DES-1210-52/ME:5#