D-Link DES-1210-52/ME - Create 802.1 X User; Show 802.1 X User

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
313
DES-1210-52/ME:5# show 802.1x guest_vlan
Command: show 802.1x guest_vlan
Guest VLAN Settings
--------------------------------------------------------------------------
Guest VLAN : default
Enabled Guest VLAN Ports :
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,2
1,22,23,24,25,26,27,28
DES-1210-52/ME:5#
create 802.1x user
Purpose
Enable network access to a 802.1x user.
Syntax
create 802.1x user <username 15>
Description
The create 802.1x user command enables network access to a
802.1x user.
Parameters
<vlan_name 15> − The name of the 802.1x user to be created.
Restrictions
Only Administrator, operator or power user-level users can issue this
command.
Example usage:
To create a 802.1x user:
DES-1210-52/ME:5# create 802.1x user dlink
Command: create 802.1x user dlink
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DES-1210-52/ME:5#
show 802.1x user
Purpose
Displays the user information for the Guest VLAN.
Syntax
show 802.1x user
Description
The show 802.1x user command displays the 802.1x user
information on the Switch.
Parameters
None.
Restrictions
Only Administrator, operator or power user-level users can issue this
command.
Example usage:
To display the 802.1x user information: