D-Link DES-1210-52/ME - Enable Snmp Authenticate_Traps; Disable Snmp Authenticate_Traps; Show Snmp Traps

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
95
DES-1210-52/ME:5#
enable snmp authenticate_traps
Purpose
To enable SNMP authentication traps support.
Syntax
enable snmp authenticate_traps
Description
The enable snmp authenticate_traps command enables SNMP
authentication trap support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To turn on SNMP authentication trap support:
DES-1210-52/ME:5# enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DES-1210-52/ME:5#
disable snmp authenticate_traps
Purpose
To disable SNMP authentication traps support.
Syntax
disable snmp authenticate_traps
Description
The disable snmp authenticate_traps command disables SNMP
authentication trap support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable the SNMP authentication trap support:
DES-1210-52/ME:5# disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DES-1210-52/ME:5#
show snmp traps
Purpose
To display SNMP trap support status on the Switch.
Syntax
show snmp traps
Description
The show snmp traps command displays the SNMP trap support
status currently configured on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To view the current SNMP trap support: