D-Link DES-1210-52/ME - Show Mcast_Filter_Profile

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
293
profile_id [all | <integer 1-24>] − The profile id of the VLAN on which
the multicast forwarding filtering database resides.
profile_name <string 20> − The name of the VLAN on which the
multicast forwarding filtering database resides.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To delete the IPv4 multicast address profile with a profile name of rd3:
DES-1210-52/ME:5# delete mcast_filter_profile ipv4 profile_name rd3
Command: delete mcast_filter_profile ipv4 profile_name rd3
Success.
DES-1210-52/ME:5#
show mcast_filter_profile
Purpose
To display multicast filtering settings on the Switch.
Syntax
show mcast_filter_profile {[ipv4 | ipv6]} {profile_id <integer 1-
24> | profile_name <string 20>}
Description
The show mcast_filter_profile command displays the multicast
filtering profiles settings.
Parameters
[ipv4 | ipv6] – Specify the IPv4 or IPv6 of multicast filter profile to be
displayed on the Switch.
profile_id <integer 1-24> - Specify the profile id of multicast filter
profile to be displayed.
profile_name <string 20> - Specify the profile name of multicast filter
profile to be displayed.
Restrictions
None.
Example usage:
To display all the defined multicast address profiles:
DES-1210-52/ME:5# show mcast_filter_profile
Command: show mcast_filter_profile
Type Profile ID Profile Name
----- ------------ --------------------------------
v6 1 rd2
v6 4 rd4
[v6 Profiles]
ID IPv6 Address Range
-- -----------------------------------------
4 ff0e:0000:0000:0000:0100:0000:0000:0020 ~
ff0e:0000:0000:0000:0100:0000:0000:0022
DES-1210-52/ME:5#