DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
291
Only Administrator or operator-level users can issue this command.
Example usage:
To create an IPv6 multicast filtering profile on the Switch:
DES-1210-52/ME:5# create mcast_filter_profile ipv6 profile_id 1 profile_name
rd2
Command: create mcast_filter_profile ipv6 profile_id 1 profile_name rd2
Success.
DES-1210-52/ME:5#
config mcast_filter_profile profile_id
To configure multicast filtering profile on the Switch.
config mcast_filter_profile profile_id <integer 1-24> [[add |
delete] <mcast_addr> | profile_name <string 20>]
The config mcast_filter_profile command displays the multicast
filtering profiles settings.
<integer 1-24> - Specify the profile id to be added or deleted for the
multicast filter.
[add | delete] – Add or delete the profile id which user specified.
<mcast_addr> – Specify the range of MAC address.
profile_name <string 20> – Configures the profile name of the profile
ID.
Only Administrator or operator-level users can issue this command.
Example usage:
To add the multicast address range 225.1.1.1 to 225.1.1.10 to the profile on the Switch:
DES-1210-52/ME:5# config mcast_filter_profile profile_id 3 add 225.1.1.1
225.1.1.10
Command: config mcast_filter_profile profile_id 3 add 225.1.1.1 225.1.1.10
Success.
DES-1210-52/ME:5#
config mcast_filter_profile profile_name
To configure multicast filtering profile on the Switch.
config mcast_filter_profile profile_name <string 20> [[add |
delete] <mcast_addr> | profile_name <string 20>]
The config mcast_filter_profile profile_name command displays
the multicast filtering profiles settings.
<string 32> - The name of the VLAN on which the MAC address
resides.
[add | delete] – Add or delete the profile id which user specified.
<mcast_addr> – Specify the range of MAC address.
profile_name <string 20> – Configures the profile name of the profile
To Next Page
Loading...
