D-Link DES-1210-52/ME - Delete Rmon Collection Stats; Create Rmon Collection History

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
206
port <ifindex> − Specifies the port from which the RMON information
was taken.
owner <owner_string 32> − Specifies the device or user that defined
the stats.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To create a RMON collection stats on the Switch:
DES-1210-52/ME:5# create rmon collection stats 100 port 1 owner dlink
Command: create rmon collection stats 100 port 1 owner dlink
Success.
DES-1210-52/ME:5#
delete rmon collection stats
Purpose
To remove the network collection stats.
Syntax
delete rmon collection stats <stats_index 1-65535>
Description
The delete rmon collection stats command removes the network
collection stats on the Switch.
Parameters
<stats_index 1-65535> − Specifies the stats number to be removed.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To delete a RMON collection stats on the Switch:
DES-1210-52/ME:5# delete rmon collection stats 100
Command: delete rmon collection stats 100
Success.
DES-1210-52/ME:5#
create rmon collection history
Purpose
To allow user to configure the rmon history settings on the Switch.
Syntax
create rmon collection history <hist_index 1-65535> port
<ifindex> {buckets <buckets_req 1-50> interval <interval 1-
3600> owner <owner_string 32>}
Description
The create rmon collection history command allows user to
configure the rmon history settings on the Switch.
Parameters
<hist_index 1-65535> − Indicates the history control entry number.
port <ifindex> − Specifies the port from which the RMON information
was taken.
buckets <buckets_req 1-50> − Specifies the number of buckets that
the device saves.
interval <interval 1-3600> − Specifies in seconds the time period that
samplings are taken from the ports. The field range is 1-3600. The
default is 1800 seconds (equal to 30 minutes).