D-Link DES-1210-52/ME - Show Gvrp; Show Gvrp Timer

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
222
show gvrp
Purpose
To display the GVRP status for a port list or port channel on the
Switch.
Syntax
show gvrp {<portlist>}
Description
The show gvrp command displays the GVRP status for a port list or
a port channel on the Switch.
Parameters
<portlist> − Specifies a port or range of ports for which the GVRP
status is to be displayed.
Restrictions
None.
Example usage:
To display GVRP port 5~8 status:
DES-1210-52/ME:5# show gvrp 5-8
Command: show gvrp 5-8
Global GVRP : Enable
Port PVID GVRP State Ingress Checking Acceptable Frame Type
---- ---- ---------- ----------------------- ---------------------------------
5 1 Enable Enable All Frames
6 1 Enable Enable All Frames
7 1 Enable Enable All Frames
8 1 Enable Enable All Frames
Total Entries : 4
DES-1210-52/ME:5#
show gvrp timer
Purpose
To display the GVRP timer information on the Switch.
Syntax
show gvrp timer
Description
The show gvrp command displays the GVRP timer on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display GVRP timer information:
DES-1210-52/ME:5# show gvrp timer
Command: show gvrp timer
Garp Timer Info (in milli seconds)
---------------------------------------
Join-time Leave-time Leave-all-time
----------- ---------- --------------