DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
170
The clear flood_fdb command clears dynamically learned entries
from the Switch’s forwarding database.
Only Administrator or operator-level users can issue this command.
Example usage:
To clear all FDB dynamic entries:
DES-1210-52/ME:5# clear flood_fdb
Command: clear flood_fdb
Success.
DES-1210-52/ME:5#
To display the flow meter information on the Switch.
show flow_meter {profile_id <value 1-10> | access_id <value 1-
128>}
The show flow_meter command displays the flow meter
information on the Switch.
profile_id <value 1-10> - .Specify the profile id to be displayed.
access_id <value 1-128> - Specify the access id to be displayed.
Example usage:
To display flow meter information:
DES-1210-52/ME:5# show flow_meter
Command: show flow_meter
Flow Meter information:
-------------------------------------
Total Flow Meter Entries: 0
DES-1210-52/ME:5#
To display the contents of the Switch’s multicast forwarding
database.
show multicast_fdb {vlan <vlan_name 32> | mac_address
<macaddr>}
The show multicast_fdb command displays the current contents of
the Switch’s multicast MAC address forwarding database.
vlan <vlan_name 32> − The name of the VLAN on which the MAC
address resides.
mac_address <macaddr> − The MAC address that will be added to
To Next Page
Loading...
