D-Link DES-1210-52/ME - Enable Vlan_Trunk; Disable Vlan_Trunk; Show Vlan_Trunk

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
223
100 600 10000
DES-1210-52/ME:5#
enable vlan_trunk
Purpose
To enable VLAN trunking on the switch.
Syntax
enable vlan_trunk
Description
The enable vlan_trunk command, along with the disable
vlan_trunk command below, is used to enable and disable VLAN
trunking on the Switch, without changing the VLAN trunking
configuration on the ports.
Parameters
None.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To enable vlan_trunk on the switch:
DES-1210-52/ME:5#enable vlan_trunk
Command: enable vlan_trunk
Success.
DES-1210-52/ME:5#
disable vlan_trunk
Purpose
To disable VLAN Trunking on the switch.
Syntax
disable vlan_trunk
Description
The disable vlan_trunk command, along with the enable
vlan_trunk command below, is used to disable and enable VLAN
Trunking on the Switch, without changing the VLAN Trunking
configuration on the ports.
Parameters
None.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To disable vlan_trunk on the switch:
DES-1210-52/ME:5# disable vlan_trunk
Command: disable vlan_trunk
Success.
DES-1210-52/ME:5#
show vlan_trunk
Purpose
To display the current VLAN Trunking configuration on the Switch.
Syntax
show vlan_trunk
Description
The show vlan_trunk command displays summary information
about VLAN trunking status and configured ports.