DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
283
To display mld snooping multicast VLAN group:
DES-1210-52/ME:5# show mld_snooping multicast_vlan_group
Command: show mld_snooping multicast_vlan_group
VID Vlan Name IP Range
---- -------------------------------- -----------------------------------------
DES-1210-52/ME:5#
config mld_snooping mrouter_ports
To enable mld mrouter ports.
config mld_snooping mrouter_ports [vlan_name <string 32> |
vlanid <vidlist> | all] [add | delete] <portlist>
The config mld_snooping mrouter_ports command defines a port
that is connected to a multicast router port.
vlan_name <string 32> – specifies that the mld snooping applies
only to this previously created VLAN.
vlanid <vidlist> – specifies that the mld snooping applies only to this
previously created VLAN id.
all – specifies that MLD snooping is to be configured for all VLANs
on the Switch.
add – Adds a specified port to the mld snooping mrouter port.
delete – Deletes a specified port to the mld snooping mrouter port.
<portlist> – Defines the ports to be included from the mld snooping
mrouter group.
Only administrator, operator or power user–level users can issue
this command. Separate non–consecutive Ethernet ports with a
comma and no spaces; use a hyphen to designate a range of ports.
These ports are defined as connected to a multicast router.
Example usage:
To configure mld mrouter ports:
DES-1210-52/ME:5# config mld_snooping mrouter_ports vlanid 1 add 1-3
Command: config mld_snooping mrouter_ports vlanid 1 add 1-3
Success.
DES-1210-52/ME:5#
config mld_snooping mrouter_port_forbidden
To define mld mrouter ports forbidden on the Switch.
config mld_snooping mrouter_port_forbidden [vlan_name
<string 32> | vlanid <vidlist> | all] [add | delete] <portlist>
The config mld_snooping mrouter_port_forbidden command
forbids a port from being defined as a multicast router port by static
configuration or by automatic learning.
vlan_name <string 32> – Specifies that the mld snooping applies
To Next Page
Loading...
