D-Link DES-1210-52/ME - Show Dhcp_Local_Relay; Enable Dhcpv6_Relay

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
123
status by VLAN name or VLAN ID.
Restrictions
Only Administrator, operator or power user-level users can issue this
command.
Example usage:
To disable the VLAN id 1 from VLAN of DHCP Local Relay:
DES-1210-52/ME:5# config dhcp_local_relay vlan vlanid 1 state disable
Command: config dhcp_local_relay vlan vlanid 1 state disable
Success.
DES-1210-52/ME:5#
show dhcp_local_relay
Purpose
To display which VLAN’s the feature works on.
Syntax
show dhcp_local_relay
Description
Each VLAN which was added to the DHCP Local Relay list
participates in the DHCP Local Relay process – Option 82 is added
to DHCP requests on this VLAN, and Removed from DHCP Replies
on this VLAN.
Parameters
None.
Restrictions
None.
Example usage:
To display the DHCP local relay information on the Switch:
DES-1210-52/ME:5# show dhcp_local_relay
Command: show dhcp_local_relay
DHCP/BOOTP Local Relay Status : Enabled
DHCP/BOOTP Local Relay PortList : None
DHCP/BOOTP Local Relay VID List :
DES-1210-52/ME:5#
enable dhcpv6_relay
Purpose
To enable DHCPv6 Relay function on the Switch
Syntax
enable dhcpv6_relay
Description
The enable dhcpv6_relay command is used to enable the DHCPv6
relay global state on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage: