D-Link DES-1210-52/ME User Manual

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
115
Command
Parameter
config dhcpv6_relay
option_38
ports <portlist> [state [enable | disable] | subscriber_id [default | user_define]]
show dhcpv6_relay
option_38
{ports <portlist>}
Each command is listed in detail, as follows:
enable dhcp_relay
Purpose
To enable DHCP Relay server on the Switch
Syntax
enable dhcp_relay
Description
The enable dhcp_relay command sets the DHCP Relay to be
globally enabled on the Switch and on all existing VLANs.
Parameters
None.
Restrictions
Only Administrator, operator or power user-level users can issue this
command.
Example usage:
To enable DCHP Relay on the Switch:
DES-1210-52/ME:5# enable dhcp_relay
Command: enable dhcp_relay
Success.
DES-1210-52/ME:5#
disable dhcp_relay
Purpose
To disable DHCP Relay server on the Switch
Syntax
disable dhcp_relay
Description
The disable dhcp_relay command sets the DHCP Relay to be
globally disabled on the Switch and on all existing VLANs.
Parameters
None.
Restrictions
Only Administrator, operator or power user-level users can issue this
command.
Example usage:
To disable DHCP Relay on the Switch:
DES-1210-52/ME:5# disable dhcp_relay
Command: disable dhcp_relay
Success.
DES-1210-52/ME:5#

D-Link DES-1210-52/ME Specifications

General

Brand	D-Link
Model	DES-1210-52/ME
Category	Network Router
Language	English