D-Link DES-1210-52/ME - Disable Snmp Dhcpv6_ Screening Traps; Enable Snmp Impb_Violation Traps

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
102
Syntax
enable snmp DHCPv6_screening traps
Description
The enable snmp DHCPv6_screening traps command enables
SNMP DHCPv6 screening traps support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable SNMP DHCPv6 screening traps support on the Switch:
DES-1210-52/ME:5# enable snmp DHCPv6_screening traps
Command: enable snmp DHCPv6_screening traps
Success.
DES-1210-52/ME:5#
disable snmp DHCPv6_ screening traps
Purpose
To disable SNMP DHCPv6 screening traps.
Syntax
disable snmp DHCPv6_screening traps
Description
The disable snmp DHCPv6_screening traps command enables
SNMP DHCPv6 screening traps support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable SNMP DHCPv6 screening traps support on the Switch:
DES-1210-52/ME:5# disable snmp DHCPv6_screening traps
Command: disable snmp DHCPv6_screening traps
Success.
DES-1210-52/ME:5#
enable snmp IMPB_violation traps
Purpose
To enable SNMP IMPB violation traps.
Syntax
enable snmp IMPB_violation traps
Description
The enable snmp IMPBv2 traps command enables SNMP IMPB
violation traps support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable SNMP IMPB violation traps support on the Switch:
DES-1210-52/ME:5# enable snmp IMPB_violation traps
Command: enable snmp IMPB_violation traps