D-Link DES-1210-52/ME - Enable Trusted_Host; Disable Trusted_Host

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
91
that are designated as recipients of SNMP traps generated by the
Switch’s SNMP agent.
Parameters
<ip6_addr> − The IPv6 address of a remote SNMP manager that
receives SNMP traps generated by the Switch’s SNMP agent.
Restrictions
None.
Example usage:
To display the currently configured SNMP hosts on the Switch:
DES-1210-52/ME:5# show snmp v6host
Command: show snmp v6host
SNMP Host Table
(Maximum Entries : 10)
Host IP Address SNMP Version Community or User Name
------------------------------------ -------------------- -------------------------------------
3000::1 V3-NoAuthNoPriv dlink
Success.
DES-1210-52/ME:5#
enable trusted_host
Purpose
To enable the trusted host.
Syntax
enable trusted_host
Description
The enable trusted_host command enables the trusted host
feature.
Parameters
None.
Restrictions
Only administrator or operator level users can issue this command.
Example usage:
To enable the trusted host on the Swtich:
DES-1210-52/ME:5# enable trusted_host
Command: enable trusted_host
Success.
DES-1210-52/ME:5#
disable trusted_host
Purpose
To enable the trusted host.
Syntax
disable trusted_host
Description
The disable trusted_host command disables the trusted host
feature.
Parameters
None.