D-Link DES-1210-52/ME - Show Lldp Ports

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
385
Parameters
None.
Restrictions
None.
Example usage:
To show LLDP settings:
DES-1210-52/ME:5# show lldp
Command: show lldp
LLDP System Information
Chassis Id Subtype : MAC Address
Chassis Id : 00-01-02-03-04-05
System Name :
System Description : DES-1210-52/ME 7.00.004
System Capabilities : Bridge
LLDP Configurations
LLDP Status : Enable
Message Tx Interval : 10
Message Tx Hold Multiplier: 2
ReInit Delay : 1
Tx Delay : 1
Notification Interval : 5
DES-1210-52/ME:5#
show lldp ports
Purpose
To display the Link Layer Discovery Protocol (LLDP) ports
configuration on the switch.
Syntax
show lldp ports {<portlist>}
Description
The show lldp ports command displays the information regarding
the ports.
Parameters
<portlist> − A port or range of ports to be displayed.
Restrictions
None.
Example usage:
To show the information for port 1: