D-Link DES-1210-52/ME - Page 169

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
151
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To configure the system login timeout:
DES-1210-52/ME:5# config syslogintimeout 30
Command: config syslogintimeout 30
Success.
DES-1210-52/ME:5#
config sysgroupinterval
Purpose
To configure the system group interval to optimal frequency.
Syntax
config sysgroupinterval [<integer 120-1225> | 0]
Description
The config sysgroupinterval command is used to configure the
system group interval to optimal frequency.
Parameters
[<integer 120-1225> | 0] − Specify the system group interval. And
the range is from 120 to 1225 seconds. 0 means disabling the
reporting function.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To configure the system group interval:
DES-1210-52/ME:5# config sysgroupinterval 200
Command: config sysgroupinterval 200
DES-1210-52/ME:5#
show log_software_module
Purpose
To display the protocols or applications which support the enhanced
logs.
Syntax
show log_software_module
Description
The show log_software_module command is used to display the
protocols or applications that support the enhanced logs.
Parameters
None.
Restrictions
None.
Example usage:
To display the protocols or applications that support the enhanced log:
DES-1210-52/ME:5# show log_software_module
Command: show log_software_module
CLI SYSTEM
DES-1210-52/ME:5#