D-Link DES-1210-52/ME - Page 94

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
76
Command
Parameter
show snmp groups
create snmp host
<ipaddr> [v1 <username 32> | v2c <username 32> | v3 [noauth_nopriv |
auth_nopriv | auth_priv] <username 32>]
delete snmp host
<ipaddr>
show snmp host
{<ipaddr>}
create snmp v6host
<ip6_addr> [v1 <username 32> | v2c <username 32> | v3 [noauth_nopriv |
auth_nopriv | auth_priv] <username 32>]
delete snmp v6host
<ipv6_addr>
show snmp v6host
<ipv6_addr>
enable trusted_host
disable trusted_host
create trusted_host
[<ipaddr> | network <network_address> | <ipv6_addr> | ipv6_prefix
<ipv6networkaddr>]
show trusted_host
delete trusted_host
[<ipaddr> | network <network_address> | <ipv6_addr> | ipv6_prefix
<ipv6networkaddr> | all]
enable snmp traps
disable snmp traps
enable snmp
authenticate trap
disable snmp
authenticate trap
show snmp traps
enable snmp
linkchange_traps
disable snmp
linkchange_traps
config snmp
linkchange_traps ports
[<portlist> | all] [enable | disable]
show snmp traps
linkchange_traps
config snmp
system_contact
<string 128>
config snmp
system_location
<string 128>
config snmp
system_name
<string 128>
config snmp
warmstart_traps
[enable | disable]
config snmp
[enable | disable]